Model : SE-300B
Availability: Indent
Rp 19,800,000,-
  • Harga yang ditampilkan belum termasuk pajak dan ongkos kirim
  • Harga berubah setiap periode tertentu mengikuti perubahan kurs yang berlaku
  • Garansi 1 tahun

Garansi 1 tahun
Izin Edar
Kementrian Kesehatan RI Nomor : AKL-20502813845

3-channel ECG.Color Screen

CMRR≥115 dB Band width 0.05~150Hz

300 ECGs memory

Roll paper


  • Portable and lightweight design
  • LCD screen
  • Support linear/2D barcode scanner
  • Automatic measurement and interpretation tested    with authoritative CSE/AHA/MIT database
  • 500 ECG recordings storage capacity
  • Support USB flash disk to extend memory
  • Support external printer via USB port    


SE-300 series

Safety Specifications

Comply with

IEC 60601-1:1988+A1:1991+A2:1995
EN 60601-1:1990+A1:1993+A2:1995
EN 60601-1-2:2001+A1:2006
IEC/EN 60601-2-51

Anti-electric-shock type

Class І with internal power supply

Anti-electric-shock degree

Type CF

Degree of protection against harmful

ingress of water

Ordinary equipment (Sealed equipment without liquid

Disinfection/sterilization method

Refer to the user manual for details

Degree of safety of application in the

presence of flammable gas

Equipment not suitable for use in the presence of
flammable gas

Working mode

Continuous operation


CISPR 11 Group 1, Class A

Patient Leakage Current

NC <10μA (AC) / <10μA (DC)

SFC <50μA (AC) / <50μA (DC)

Patient Auxiliary Current

NC <10μA (AC) / <10μA (DC)

SFC <50μA (AC) / <50μA (DC)

Environment Specifications


Transport & Storage : -20ºC (-4ºF) ~ +55ºC (+131ºF)

Working : +5ºC (+41ºF) ~ +40ºC (+104ºF)

Relative Humidity

Transport & Storage : 15%RH ~ 95%RH Non-Condensing

Working:  15%RH ~ 95%RH Non-Condensing

Atmospheric Pressure

Transport & Storage : 70kPa ~ 106kPa

Working : 70kPa ~ 106kPa

Physical Specifications


300mm (L)×260mm (W)×85mm (H)


Approx. 2.5kg (5.5 lbs)
(Excluding recorder paper and battery)


320×240 LCD Screen (black and white screen is for configuration A, color
screen is for configuration B)

Power Supply Specifications

Mains Supply

Operating voltage =100V-115V~ / 220V-240V~

Operating frequency = 50Hz / 60Hz

input power = 35VA

Built-in Lithium Battery Pack

Rated voltage = 14.8V

Rated capacity = 2200mAh

When the battery is fully charged, the 3-channel
electrocardiograph can work normally about 6.5 hours. It
can continuously record about 3 hours in Manual mode, and
record 330 reports at most in the AUTO mode.

Necessary Charge time: 5 hours

Cycle life ≥ 300 times


T400mA 250V Ø5×20 / T200mA 250V Ø5×20

Performance Specifications


Thermal dot-matrix recorder

Printing Density

8 dots per mm / 200 dots per inch (amplitude axes)
40 dots per mm / 1000 dots per inch (time axes, @ 25 mm/s)

Recorder Paper

Folded thermal paper, 80mm×70mm×200pages
Rolled thermal paper, 80mm×20m

Effective Width 72mm
Paper Speed 5mm/s, 6.25mm/s, 10mm/s, 12.5mm/s, 25mm/s, 50mm/s
Accuracy of data ±5% (x-axis), ±5%(y-axis)
HR Recognition Technique Peak-Peak Detection
HR Range 30 bpm ~ 300 bpm
HR Recognition Accuracy ±1 bpm
Leads Standard 12 leads
Acquisition Mode simultaneously 12 leads
A/D 12 bits
Resolution 0.1575 μV/LSB
Time Constant ≥3.2s
Frequency Response 0.01Hz ~ 300Hz (-3dB)
Sensitivity 2.5mm/mV, 5mm/mV, 10mm/mV, 20mm/mV, AGC
Input Impedance ≥50MΩ(10Hz)
Input Circuit Current ≤0.05μA
Input Voltage Range ≤±5 mVpp
Calibration Voltage 1mV±3%
DC Offset Voltage ±500mV / ±600mV(optional, with DE12 ECG board)
Minimum Amplitude 20 μVp-p
Noise ≤12.5μVp-p
Multi-channel Crosstalk ≤0.5mm

AC Filter: On / Off

DFT Filter: 0.05Hz / 0.15Hz / 0.25Hz / 0.32Hz / 0.5Hz /

EMG Filter: 25Hz / 35Hz / 45Hz / OFF

LOWPASS Filter:150Hz / 100Hz / 75Hz

CMRR ≥110dB / ≥115dB (optional, with DE12 ECG board)
Sampling Frequency 1000Hz
Pacemaker Detection (Optional, with DE12 ECG board)
Amplitude ±2mV ~ ±250mV
Width 0.1ms ~ 2.0ms
Sampling Frequency 10,000/sec/channel
External Input/Output
Input ≥100kΩ; Sensitivity 10mm/V±5%;
Single ended
Output ≤100Ω; Sensitivity 1V/mV±5%;
Single ended



Tags: SE-300B
Related Products